Acess Point 300MBps TP-Link 2 Antenas
PN: TL-WA801ND 300Mbps wireless transmission rate, brings smooth wireless N experience
Supports multiple operating modes: Access Point, Client, Universal/ WDS Repeater, Wireless Bridge
Easily setup a WPA encrypted secure connection at a push of the QSS button
Up to 30 meters (100 feet) of flexible deployment with included Power over Ethernet Injector Wireless N - Speed & Range
Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through two antennas to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not! Multiple Operating Modes - Easy to Build WLAN
Supports AP Client, Bridge, Repeater and AP operation modes to enable various wireless applications to give users a more dynamic and comprehensive experience when using their AP. Multiple operating mode also helps you easily to build wireless network for hard-to-wire locations or eliminating wireless dead zone. QSS Button - Quick Setup Security
Compatible with WI-FI Protected Setup™ (WPS), TL-WR801ND features Quick Security Setup that allows users to almost instantly setup their security simply by pressing the "QSS" button automatically establishing a WPA2 secure connection, which is more security compared with WEP encryptions. Not only is this faster than normal security setups but more convenient in that you don’t need to remember a password! Passive PoE Supported- More Flexible Deployment
The TL-WA801ND is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office. :: Technical Specification HARDWARE FEATURES
Interface One 10/100M Ethernet Port(RJ45)
Support Passive PoE
Button Quick Setup Security Button
Reset Button
External Power Supply 12VDC / 1A
Wireless Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Dimensions ( W x D x H ) 6.9*4.7*1.1 in.(174*120*28.8mm)
Antenna Type 2*4dBi Detachable Omni Directional (RP-SMA) WIRELESS FEATURES
Frequency: 2.4-2.4835GHz
Signal Rate:
11n: Up to 300Mbps(dynamic)
11g: Up to 54Mbps(dynamic)
11b: Up to 11Mbps(dynamic)
EIRP: <20dBm(EIRP)
Reception Sensitivity
270M: -68dBm@10% PER
130M: -68dBm@10% PER
108M: -68dBm@10% PER
54M: -68dBm@10% PER
11M: -85dBm@8% PER
6M: -88dBm@10% PER
1M: -90dBm@8% PER
Wireless Modes:
AP/Multi-SSID/AP Client/Repeater/
Universal Repeater/Bridge+AP
Wireless Functions: Enable/Disable Wireless Radio, WDS Bridge,
Wireless Security: 64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK
DHCP: DHCP Server
Quality of Service: WMM
Management: SNMP
Advanced Functions: Up to 30 meters PoE is supported 
|
